|
|
 |
|
Portable Vibration Analyzers & Field Balancers...
|
 Series 60
The all new VIBROTEST 60 is a state-or-the-art hand-held unit that can be used as an off-line analyzer, a field balancer, or integrated with SCHENCK software for complete predictive maintenance capability.
The VIBROTEST 60 has an advanced Digital Signal Processor (DSP) that provides fast, accurate measuring results with a brilliant, high resolution screen. Two channels, plus one speed/ reference channel, can simultaneously process up to 5 machine parameters such as overall mechanical vibration, bearing condition values, frequency spectrum and speed, in one measurement - on one screen.
Similar to the Series 40 instruments, these units have a modular design that can be completely customized to meet your individual requirements. |
|
 |
 |
 |
|
|
Module 1 - For comprehensive evaluation of
machine condition |
|
Features include: |
|
• |
Listing function to acquire measurements |
|
• |
A report memory for nearly unlimited storage
capacity through the use of PC cards. |
|
• |
A flexible instrument configuration for free
setup of high-band and low-pass filters for broad band
vibration measurement. |
|
• |
Simultaneous processing of vibration and
bearing condition values. |
|
• |
Averaging function for the reduction of noise
and peaks. |
|
Modules include: |
|
• |
Absolute bearing vibrations |
|
• |
Relative shaft vibrations |
|
• |
Bearing condition unit measurements (BCU) |
|
• |
Process values |
|
• |
Speed |
|
| Module 2 - To accurately diagnose faults
and damages |
|
Features include: |
|
• |
Averaging functions such as time domain, frequency domain
and peak hold. |
|
• |
Windowing functions such as Flat top, Uniform and Hanning,
for signal analysis. |
|
• |
Bearcon Signature analysis capability for diagnosis of
bearing damage. |
|
• |
16 bit ADC and 12,800 line spectrum for high resolution
and accuracy. |
|
• |
Zoom functions in the X an Y axis. |
|
Modules include: |
|
• |
FFT spectrum |
|
• |
Bearcon signature (envelope detection) |
|
| Module 3 - For tracking analysis |
|
Features include: |
|
• |
Simultaneous acquisition of the amplitude and
phase values of two
orders of vibration. |
|
• |
Extremely sharp tracking filter with bandwith
from 2 Hz to 0.01 Hz. |
|
• |
Maximum number of measured values during
acquisition of run-up and run-down data. |
|
• |
Graphic display of amplitude and phase
measurements. |
|
| Module 5 - Dual channel
function |
|
• |
For dual channel capability |
|
| Module 7 - For a new level of field
balancing capability |
|
Features include: |
|
• |
User-friendly dialogue assisted operation. |
|
• |
Integrated balancing program offers a choice of mass
compensation in polar form, component form, or unit mass
correction. |
|
• |
Automatic error messaging for unacceptable speed
variations or unsuitable test masses. |
|
Modules include: |
|
• |
1 plane balancing |
|
• |
2 plane balancing |
| As with many SCHENCK instruments, these units
come complete with start-up accessories and have a modular
design so you can choose the features you need now and
upgrade later if your needs change! |
|
|
|
|
For complete information, ask for our BBF 009-US-11 brochure in our Literature Library.
|
|
Register or login to access our literature
library.
|
|
|
|
