|
1.
OPERATOR TRAINING AND COMMISSIONING
- After the machine has been installed according to written
instructions and a floor plan furnished by us, a Service
Engineer can be provided for commissioning of the machine and
operator training.
1.1.
Commissioning
of the machine will consist of the following:
1.1.1.
Inspect the installation and ensure that the machine is
installed properly
1.1.2.
Verify completeness of Schenck's extent of delivery
1.1.3.
Ensure proper power connection
1.1.4.
Check the machine calibration with a proving rotor (if
purchased with the machine), or a suitable work piece provided
by the customer
1.1.5.
Recommend compliance with OSHA safety requirements
1.2.
Operator Training
will
include training of the operator personnel in the use of the
balancing machine, instrumentation and accessories. The
following topics will be covered:
1.2.1.
Operator Manual
1.2.2.
Proper machine setup
1.2.3.
Control station operation
1.2.4.
Instrumentation setup
1.2.5.
Standard and optionally purchased instrumentation
software features
1.2.6.
Basic preventive maintenance practices
The cost of Commissioning and Operator training is NOT
INCLUDED in the price of the machine.
Additionally, Schenck Trebel can provide training and balancing
seminars at our current rate schedule. Please refer to the
attached "TERMS AND CONDITIONS FOR COMMISSIONING, ON-SITE
REPAIR, AND OTHER SERVICES" and brochure "BALANCING SEMINAR
PROGRAM."
2.
PROVING ROTOR WITH TEST WEIGHTS
– The balancing machine will be shipped with a test rotor and a
set of matching test weights for verification of machine
calibration during commissioning and operator training.
The proving rotor with weight set
may be purchased at a price of $1,200 or returned to Schenck
Trebel after the installation of the machine. Please note if
proving rotor is not purchased, returned shipping costs are
buyer’s responsibility.
3.
EXPORT STATEMENT
– The export of any product and software purchased from
Schenck Trebel must be made in accordance with all relevant laws
of the United States, including and without limitation, the U.S.
Export Administration Regulations. This may require that you
obtain a formal export license or make certain declarations to
the United States Government regarding product(s) to be
exported, their destination or their end-use.
4.
TERMS AND CONDITIONS-
Orders accepted via credit card
(Visa, MasterCard, American Express) or purchase order (company
check or wire transfer). Progress Payment schedule to be
applied as follows:
30% with purchase order
30% prior to shipment
40% net 30 days after shipment from F.O.B. point
All other
Terms
and Conditions
5. DELIVERY - Current projected delivery:
Two (2) months after receipt of order and clarification of
technical specifications. We reserve the right to adjust the
delivery schedule at time of order to reflect the then current
production schedule. |
