Angle Transfer
Device
Angle transfer device. Used with balancing machine to
accurately locate reference angle manually.
p/n 9093-001
1 piece
$275.00
Balancing Clay
For temporary balance correction of rotors before
permanent corrections are made.
p/n 8074-006
1 Block, Brown, 1.1 lbs
$30.00
White Wax
For temporary balance correction of rotors before
permanent corrections are made.
p/n 8980-000
1 Block- 6" x 1.5" x 3.5", 1 lb
$9.15
Reflective
Scanning Tape
Used with photocell equipped balancing machines as a
speed reference mark. This adhesive reflective tape can
be cut to size and temporarily applied to rotors.
p/n 2169-020
1 Roll, 15' x 1/4"
$35.00
Balancing Clip
Installation and Removal Tool-Large
The tool head has an embedded magnet that holds the
weight in place to facilitate installation and removal
and eliminate loss of the weight. An extendable
handle enables access into tight areas. Aluminum
construction prevents sparking in flammable areas and
keeps the magnet from attaching itself to metallic
objects.
p/n BCIT
$59.95
Balancing Clip
Installation and Removal Tool-Short
The smaller tool head has a smaller magnet that holds
the weights in place. This tool is appropriate for
the BC-02 clips up to the BC-24, as well as the RIC-01
through the RIC-36. The tool has the same aluminum
construction as the longer tool.
p/n BCIT-Short
$49.95
Paint
Markers
Paint markers are
used to mark your stinger or magnet locations to ensure
measurements are taken at the same place each time.
Also great for marking oil analysis, infrared and process
parameter routes. Color codes routes schedules.
Use them to mark tools and machinery parts in dirty or oily
environments.
Feltip Paint Marker
Silver Paint
Marker Silver paint used instead of glass bead
reflective tape for more permanent marking when
balancing or performing phase analysis with a Laser Tach
or Stroboscope.
